Ipv6 Q0S; Remote Gui; Remote Telnet; Dynamic Routing - ActionTec C3000A User Manual

C3000A 802.11n and 802.11ac Wi-Fi Router
IPv6 QoS
Log in as root to generate the IPv6 QoS Settings screen. This feature
allows the user to prioritize certain types of IPv6 data traffic over standard
IPv6 data traffic. Follow the onscreen instructions to configure.

Remote GUI

Log in as root to generate the Remote GUI screen. This feature allows
the user to access the Router's graphical user interface from a remote
location. Follow the onscreen instructions to configure.

Remote Telnet

Log in as root to generate the Remote Telnet screen. This feature allows the
user to access the Router from a remote location via telnet. Follow the
onscreen instructions to configure.

Dynamic Routing

Click Dynamic Routing from any Advanced Setup screen to generate
the Dynamic Routing (RIP) screen. This feature allows the user to set up
the Router on the network behind a modem using dynamic routing. Follow
the onscreen instructions to configure.
32