Sennheiser Evolution Wireless SK 500 Instruction Manual page 28

Adjusting the contrast of the display panel –
"LCD Contrast"
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu –
"Reset"
Advanced Menu
Reset
Call up "Reset"
When resetting the settings made in the operating menu,
only the selected settings for the pilot tone and for the
frequency banks "U1" to "U6" remain unchanged. For an
overview of the factory-preset default settings, refer to the
supplied frequency information sheet.
Displaying the software revision – "Software Revision"
You can display the current software revision of the body-
pack transmitter.
For information on software updates, visit the
SK 500 G3 product page at www.sennheiser.com.
Adjusting settings via the operating menu
SET
Reset
Yes
Select the desired
setting; apply the
setting
"Stored"
SET
27