Q & A - Samsung WF-R1061 Service Manual

13-5. Q & A
NO. Type Part
1 DRUM appear Being opened & closed
WASHER ance part bad/Being attached &
(MODE detached bad
NAME :
Q1*3*)
2 DRUM appear Label(sticker) being
WASHER ance part detached
(MODEL
NAME :
Q1*3*)
3 DRUM appear Accessories being not
WASHER ance part included
(MODEL
NAME :
Q1*3*)
4 DRUM appear Color coming off/rust
WASHER ance part
(MODEL
NAME :
Q1*3*)
5 DRUM display Display part being not lit
WASHER part up/ not being cleared
(MODEL
NAME :
Q1*3*)
6 DRUM display Character being broken
WASHER part on display
(MODEL
NAME :
Q1*3*)
7 DRUM display Display not being cleared
WASHER part
(MODEL
NAME :
Q1*3*)
8 DRUM display Display malfunction
WASHER part
(MODEL
NAME :
Q1*3*)
9 DRUM door re Door sensor not being
WASHER lated detected
(MODEL
NAME :
Q1*3*)
10 DRUM a noise A noise being occurred
WASHER intermittently during
(MODEL washing
NAME :
Q1*3*)
All manuals and user guides at all-guides.com
Situation Solution Before consulting
method
AS rere
commended
consulting ...for the specifi ca
tion or label of
product lead the
customer to attach
diretly or send the
engineer to do so.
For other advertise
ment or PR label it
may not be at
tached.
AS rere ..Check whether the
commended componets are
same as those in
the manual. If not
contact to SVC.
AS rere
commended
AS rere
commended
AS rere
commen
ded
AS rere
commen
ded
AS rere
commen
ded
Others
General
consulting
60
cause Management
In case of Door is not opened during washing. For models
a cover not applied with the boiling or drying the door will not
being open until the interior temperature decreases
opened to a certain safe level. In other cases you are
or closed recommended our engineer's inspection.
Is it the label for advertisement? Is it the label
for standards or attentions? If it is for advertise-
ment it does not matter for the function or the
use even though it is not attached since it is not
related to the function and use. If it is for st
Sir we really apologize to you for the inconven-
ience that we made from our product which was
bought by you on the basis of your trust in us.
We will try our best to clear your inconvenience
(by mail).
It may be oc Being rust or being discolored during the use is
curred when normal and natural according to the times and
the machine its use.(except the case occurred at the innitial
is installed in purchase). The replacement of case will be
the humid charged and in order to prevent the corrosion
place which change the location
causes the
rust or dis
coloring.
It is a Dry the front operation part a little with the drier
symptom and you are recommended our engineer's
occurred inspection if it does not work even after doing so.
when it is in
stalled in the
humid place
or the water
is entered its
inside.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
Please check You are recommended our engineer's inspection
whether a if the safety device is removed and there is no
washer is foreign material such a coin or pin inside.
installed and
used with
removing
the safety
device posi
tioned at its
rear.