9.10. Removal of PB-Board
1. Disconnect the connectors (PB30, PB31, PB51, PB53,
PB54, PB59, PB61, PB62, PB67, PB69, PB71).
2. Remove 4 screws and then remove PB-Board.
9.11. Removal of D-Board
Check that no bright points appears b y Ve Life adjustm ent
after both D and DN board exchange.
1. Remove Duct Barrier K.
2. Disconnect the connectors (D3, D5, D21, D25).
3. Remove the flexible cables from the connectors (D20,
D31, D32, D33, D34).
4. Remove 4 screws and then remove D-Board.
9.12. Removal of P-Board (MAIN_1)
1. Disconnect the connectors (CM1, CM2, CM3, CM4, CM5,
P2, P6, P35).
2. Remove 10 screws and then remove P-Board (MAIN_1).
29
TH-103PF12E