9.28. Removal of C5-Board (upper)
1. Remove the Reinforcem ent Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Disconnect the connector (C55).
3. Remove the flexible cables from the connectors (C50,
C51).
4. Remove 6 screws (♦ ) and then remove the flexible
cables from the connectors (CA12, CA13, CA14).
5. Remove 6 screws (O) and then
(upper).
9.29. Removal of C6-Board (upper)
1. Remove the Reinforcem ent Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Remove the flexible cable from the connector (C61).
3. Remove 4 screws ( ♦ ) and then remove the flexible
4. Remove 4 screws (O) and then
9.30. Removal of C1-Board (lower)
remove C5-Board
1. Remove the Reinforcem ent Angle (lower_left).
(Refer to Removal of SS3-Board)
2. Remove the flexible cable from the connector (C11).
3. Remove 4 screws ( ♦ ) and then remove the flexible
4. Remove 4 screws (O) and then remove C1-Board (lower).
39
cables from the connectors (CA15, CA16).
(upper).
cables from the connectors (CA1, CA2).
TH-103PF12E
remove C6-Board