C H A P T E R 2 Cisco 1710 Security Router Configuration - Cisco 1710 Software Configuration Manual

Before You Configure Your Network
Before You Configure Your Network
Configuring a Virtual Private Dialup Network
Command
Step 1 vpdn enable
Step 2
no vpdn logging
Step 3 vpdn-group tag
Step 4
request-dialin
Cisco 1710 Security Router Software Configuration Guide
2-2
Before you configure your network, you must do the following:
Arrange for a digital subscriber line (DSL) or cable connection with your
•
corporate network or service provider.
If you are setting up an Internet connection, gather the following information:
•
Client name that is assigned as your login name
–
Authentication type
–
Password for accessing your Internet service provider (ISP) account
–
– Domain Name System (DNS) server IP address and default gateways
If you are setting up a connection to a corporate network, you and its network
•
administrator must generate and share the following information for the
interfaces of the routers connected to xDSL or cable modems:
Authentication type
–
– Client name for accessing the router
Password for accessing the router
–
• If you are setting up Internet Protocol (IP) routing, generate the addressing
scheme for your IP network.
Complete the following tasks to configure a virtual private dialup network
(VPDN). Start in global configuration mode.
Chapter 2 Cisco 1710 Security Router Configuration
Task
Enable VPDN.
Disable VPDN logging.
Configure a VPDN group.
Specify the dialing direction.
78-12696-01