Operation Basics; Grounding; Safety Position; Air Hose Connection - Graco GX-8 Operation, Parts, Service, Repair

Operation Basics

Operation Basics
To prevent accidental gun operation, always discon-
nect air supply before servicing gun or anytime gun is
not in use.

Grounding

Check your local electrical code and proportioner man-
ual for detailed grounding instructions.
Ground spray gun through connection to
Graco-approved grounded fluid supply hose.

Safety Position

GX-8P guns have a two-position safety stop. When
engaged, it prevents accidental triggering of gun during
servicing or down time. When disengaged, it allows gun
to dispense.
Engage Safety Stop
To engage safety stop, push in and turn safety stop
clockwise to place gun in CLOSED safety position.
Engage the
Safety Stop
F . 4: Safety Stop - Engaged
IG
10
Disengage Safety Stop
To disengage safety stop, push in and turn safety stop
counterclockwise to place gun in OPEN position.
Disengage the
Safety Stop
F . 5: Safety Stop - Disengaged
IG

Air Hose Connection

Connect Air Hoses
Pull back sleeve of female fitting, insert male fitting and
slide sleeve forward to secure connection.
Disconnect Air Hoses
Pull back sleeve of female fitting and pull out male fit-
ting.
Pull Sleeve
F . 6: Disconnect Air Hose
IG
311338N