Replace Air Filter Element-2.5L Engine; Replace Air Filter Element-2.2L Engine - Generac Power Systems Protector Series Owner's Manual

Maintenance
Replace Air Filter Element—2.5L
Engine
1. See Figure 5-14. Remove wing nut (A), flat washer
(B), and lock washer (C) from threaded rod to
release air cleaner cover (D).
A B C
Figure 5-14. Remove Air Cleaner Cover—2.5L Engine
2. See Figure 5-15. Remove air filter element (E) and
discard.
D
Figure 5-15. Remove Air Cleaner Element—2.5L
3. Thoroughly clean air cleaner cover (D) of any dust,
dirt, or debris.
4. Place new air filter element against adapter flange.
NOTE: The air filter element is not directional.
5. Install air cleaner cover over threaded rod, followed
by flat washer, lock washer, and wing nut. Tighten
wing nut until snug.
36
D
E
Engine
Replace Air Filter Element—2.2L
Engine
NOTE: The 2.2L engine is equipped with an alternate-
style air cleaner.
1. See Figure
end cap (A) of air cleaner canister (B). Remove end
cap.
A
006183
Figure 5-16. Disassemble Air Cleaner—2.2L Engine
2. See Figure
discard.
006184
Figure 5-17. Remove Air Cleaner Element—2.2L
3. Thoroughly clean air cleaner canister, end cap, and
breather (D) of any dust, dirt, or debris.
4. Place new air filter element inside canister.
NOTE: The air filter element is not directional.
5. Install end cap on air cleaner canister and buckle
three clasps.
Owner's Manual for Stationary Diesel Generators
5-16. Release three buckle clasps from
B
5-17. Remove air filter element (C) and
C
D
Engine
006185
006186