Changing Channels; Setting The Volume; Setting The Ringer Hi/Lo Switch; Using The Redial/Pause Button - IBM -3345 Installation And Operation Manual

March 15, 2001
OPERATION - continued
5.
If there is severe interference, move closer to the base before you press any key. If interference is severe,
The keypad might lose communication with the base and the call might be disconnected.
This does not happen often, but if it does, return the keypad to the base for a few seconds.
Important: Do not answer incoming calls until Caller ID information is observed in
the LCD display.

CHANGING CHANNELS

Your IBM-3345 has an auto scan feature that automatically selects a clear channel when you press the
TALK/HANG UP button. If you experience interference during a call, press the CHAN. Button to switch to
another channel until you have good reception. (See Figure 1)
'SCANNING' will appear in the LCD window.

SETTING THE VOLUME

The VOLUME control allows you to adjust the sound level that you hear through the headset. This is especially
useful for people who have trouble hearing, or are in an especially noisy area like a kitchen or workshop.
Set the VOLUME control on the side of the remote keypad to a comfortable listening level. (See Figure 2)

SETTING THE RINGER HI/LO SWITCH

The Ringer HI/LO button lets you adjust the ringer volume that you hear through the remote Keypad.
(See Figure 2)
1. When you press and hold the RINGER HI/LO button for 1 second, the ringer volume will change from high
to low or low to high.
2. RINGER HI/LO button does not work when you are talking or when the telephone line is ringing.

USING THE REDIAL/PAUSE BUTTON

To quickly redial the last number dialed, press the TALK button.
1. When dial tone is heard, press the REDIAL/PAUSE button. (See Figure 1).
' REDIAL' will appear in the LCD window.
2. The redial memory can also switch from pulse to tone dialing and can store PAUSE entries.

USING THE MUTE BUTTON

The MUTE button mutes the headset microphone so that other party cannot hear you when you are talking to
Someoneelse in the room.
1. Press and hold the MUTE button located on remote keypad. ' MUTE' will appear in the LCD window.
2. Release the MUTE button to resume your phone conversation. (See Figure 1)
3. Eventhough the MUTE button is engaged, you can still hear other party, this is normal.
IBM-3345 (REV : 0.1)
19