Handset Power On/Off - SoftBank 942P User Manual

■
Desktop Holder Stand
Extend Stand to view videos in Viewer Position.
⿟
Hold Desktop Holder when operating handset.
Extend completely.
Charging with AC Charger Only
Insert Charger Connector (arrows up) into
External Port. To remove, squeeze Release
Tabs and pull straight out.
⿟
Open/Close External Port Cap:
ZP.xx-xx
Note
⿟
Make sure not to get strap caught between handset and Desktop
Holder.
⿟
For details, read AC Charger instructions.
Tip
●
TBD
Stand
External Port Cap
Release
Tabs
Arrows

Handset Power On/Off

1
Press and hold L
Start-up window appears and handset
enters Standby.
⿟
Enter PIN if PIN Authentication is ON
(ZP.12-2).
2 Press L for 2+ seconds
Handset shuts down.
⿟
Do not turn on handset immediately
after turning off. Wait a few seconds.
■
Initial Setup
The first time handset powers up and Initial setting window appears, select
YES and set the following: (Each item can be set separately.)
Date & Time* (ZP.18-9) Set date and time
Phone Password Enter 9999, and enter new Phone
(ZP.12-2) Password (4-8 digits)
Key Tone (ZP.18-3) Select ON or OFF
Font Size (ZP.18-6) Set Display font size all at once
* May be automatically set
1
Standby
1-15