Handset Power On/Off - SoftBank 824p User Manual

Handset Power On/Off

1
Press and hold
Start-up window appears and handset enters
Standby.
◦
Enter PIN to verify user each time handset
is turned on ( P.11-2).
2
Press for 2+ seconds
Handset shuts down.
The First Time 824P Powers Up, and Setup Window
Appears...
Select YES , and set the following:
◦
Each item can be set separately.
■
Set date and time (Date & Time) (
■
S et Phone Password
Enter "9999", and enter new Phone Password (4-8 digits). (
■
S et Key Tone
Select ON or OFF . (
P.17-2)
■
S et font size
Set Display font size all at once. (
Standby Standby
P.17-6)
P.1-24)
P.17-5)
Note
◦
If USIM not inserted After power-off Insert USIM appears, clean
and properly re-insert USIM Card then restart 824P.
◦
After a period of inactivity, Display turns off.
Retrieving Network Information
When , , or is pressed for the first time in
Standby, 824P initiates Network Information retrieval;
retrieve it.
◦
Update Network Information to use messaging, Internet, etc.
◦
Update Network Information manually: Main Menu 
 Connectivity  Retrieve NW
Settings
Info  YES
1
to
1-15