Handset Power On/Off - SoftBank 832P User Manual

Handset Power On/Off

1
1 Press and hold
Start-up window appears and handset
enters Standby.
Enter PIN if PIN Authentication is ON
( P.11-2).
Press for 2+ seconds
2
Handset shuts down.
Do not turn on handset immediately
after turning off. Wait a few seconds.
The First Time Handset Powers Up, and Setup Window
Appears...
Select YES , and set the following:
(Each item can be set separately.)
Set date and time (Date & Time:
Set Phone Password
Enter "9999", and enter new Phone Password (4-8 digits) (
Set Key Tone
Select ON or OFF (
Set font size
Set Display font size all at once (
1-14
Standby
P.17-7)
P.17-2).
P.17-5).
Note
If USIM not inserted After power-off Insert USIM appears, clean
and properly re-insert USIM Card then restart handset.
After a period of inactivity, Display turns off.
Retrieving Network Information
When , or
handset initiates Network Information retrieval;
retrieve it.
Update Network Information to use messaging, Internet, etc.
Update Network Information manually:
Connectivity
Tip
Settings
Change Wallpaper
●
Change Start-up Window (
●
P.1-23).
is pressed for the first time in Standby,
Main Menu
Retrieve NW Info YES
Add Calendar to Wallpaper
●
P.17-3)
to
Settings