Turning On The Monitor - Zenith DPDP60W Owner's Manual

Turning on the Monitor

- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
Connect power cord correctly.
1
2
Press the ON/OFF button on the Monitor. At this moment, the Monitor is
switched to standby mode. Press the
Monitor or press the power on or video/pc button on the remote control and
then the Monitor will be switched on.
Turning on the Monitor (power cord is still connected)
1
If the Monitor is turned off with the
Press the
or video/pc button on the remote control and then the Monitor will be switched
on.
2
If the Monitor is turned off with the ON/OFF button on the Monitor
• Press the ON/OFF button on the Monitor to turn on the Monitor.
3
If the Monitor is turned off with the remote control and also the ON/OFF
button on the Monitor
• Press the ON/OFF button on the Monitor and then press the
SELECT button on the Monitor or press the power on or video/pc button on
the remote control and then the Monitor will be switched on.
Tips
• Adjusting volume level
Volume(
decreases the level of sound.
or INPUT SELECT button on the Monitor or press the power on
) button increases the level of sound and volume(
G G
or INPUT SELECT button on the
button on the Monitor
) button
F F
or INPUT
31