Specifications - NEC HR17 MultiSync User Manual

Specifications

Monitor HR17
Specifications MultiSync
43cm(17inch)
Picture Tube Diagonal :
41cm(16inch)
Viewable Image Size:
ANALOG 0.7 Vp-p/75 Ohms
Input Signal Video:
Separate sync. TTL Level
Sync:
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync.(Positive/Negative)(TTL Level)
Display Colors Analog input: Unlimited number of Colors
31kHz to 96kHz
Synchronization Horizontal:
55Hz to 160Hz
Range Vertical:
640 x 480 @60 to 160Hz
Resolutions Supported
800 x 600 @55 to 153Hz
Resolution based on horizontal
1024 x768 @55 to 120Hz....
and vertical frequencies only
1152 x 870 @55 to 105Hz
1280 x 1024 @55 to 89Hz
1600 x 1200 @55 to 76Hz
Active Display Area Horizont:
310mm
(Factory setting) Vertical:
232mm
325mm
Active Display Area
(Full scan) 244mm
Power Supply AC 100 -240V, 50-60Hz
1.9 A@100 - 240V
Current Rating
403(W)x420(H)x420(D)mm
Dimensions
Weight kg
Environmental Considerations
Operating Temperature:
10˚C to +35˚C
Humidity: 30% to 80%
Altitude: 0 to 3000m
Storage Temperature: -20˚C to +60˚C
Humidity: 10% to 90%
Altitude:
0 to 13700m
NOTE: Technical specifications are subject to change without notice.
E-10
Notes
0.25mm aperture grill pitch,90˚
deflection ,P22 medium short
persistence Light transmission
approx.38%(Including AR-Film),Anti
electrostatic
Depends on display card used.
Automatically
Automatically
Some systems may not support all
modes listed
Recommended resolution at 85 Hz for
optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
Monitor HR19
Specifications MultiSync
Picture Tube Diagonal :
48.3cm(19inch)
Viewable Image Size: 45.8cm(18.0inch)
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync.(Positive/Negative)(TTL Level)
Display Colors Analog input:
Unlimited number of Colors
Synchronization Horizontal: 31kHz to 110kHz
Range Vertical: 55Hz to 160Hz
Resolutions Supported
640 x 480 @60 to 160Hz
Resolution based on horizontal 800 x 600 @55 to 153Hz
and vertical frequencies only 1024 x768 @55 to120Hz
1152 x 870 @55 to 105Hz
1280 x 1024 @55 to 89Hz...
1600 x 1200 @55 to 76Hz
Active Display Area Horizont:
356mm
(Factory setting) Vertical:
267mm
Active Display Area
365mm
(Full scan)
272mm
Power Supply AC 100 -240V, 50-60Hz
Current Rating
2.2 A@100 - 240V
Dimensions 442(W)x453(H)x455(D)mm
Weight
kg
Environmental Considerations
Operating Temperature: 10˚C to +35˚C
Humidity: 30% to 80%
Altitude: 0 to 3000m
Storage Temperature: -20˚C to +60˚C
Humidity:
10% to 90%
Altitude:
0 to 13700m
NOTE: Technical specifications are subject to change without notice.
E-11
Notes
0.25mm(at center),0.27mm(at edge)
Variable aperture grill pitch,90˚
deflection,P22 medium short
persistence.Light transmission
E
approx.40%(Including AR-Film),Anti
electrostatic
Depends on display card used.
Automatically
Automatically
Some systems may not support all
modes listed
Recommended resolution at 85 Hz for
optimal display perf o rm a n c e .
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.