Table of Contents
Advertisement
Access Easy Controller 2.1
Figure 8.2: Mechanical layout of the PSU with input voltage of 100~240 VAC
Warning!
Do not connect Live, Neutral and Ground directly onto the PSU terminals. Connect the input
!
power cable to the power socket on the AEC2.1.
8.2
Technical Specification of Power Supply Unit with Input Power
of 100~240 VAC
The table below shows the technical specifications of the PSU (input power of 100~240 VAC)
Input Voltage
Input Voltage - UL
Input Current
Environment Temperature
Environment Humidity
Output Current @ 13 VDC (Min./ Rated/ Max)
Output Current for battery charging @ Bat
(Min./ Rated/ Max)
Output Current @ 5 VDC (Min./ Rated/ Max)
8.3
Power Supply Requirement and Connection
This section describes the power supply requirement for all the electronics within each
AEC2.1 enclosure and its connection.
Robert Bosch (SEA) Pte Ltd
+
and Bat
Hardware Installation Manual
Power Supply Unit | en
100 ~ 240 VAC; 50/60 Hz
110 VAC; 60 Hz
1.5A
0 - 50 degree C
non condensing 5% ~ 85% +/-5% RH
0/ 2.5 A/ 3.5 A
-
0/ 0.23 A/ 0.23 A
0/ 3 A/ 4 A
2018.11 | 1.0.6 | F.01U.122.796
41
Advertisement
Table of Contents
