Epson SureColor T3470 User Manual page 123

Setting
Advanced Media Setting
Options Description
Platen Gap Select a larger value if print results are
smudged by print head strikes
Top/Bottom Margins The Standard margins are as follows for the
top and bottom:
• CAD/line drawings: 3 mm
• Other: 30 mm
Select a different value as necessary.
Note: Left and right margins are always 3
mm.
Paper Suction Select this to adjust the distance between the
paper and the print head; lower values for
thinner papers.
Back Tension Select High or Extra High if paper wrinkles
during printing
Drying Time Drying Time per Pass: Select from 0 to 10
seconds for the amount of time the print head
pauses to allow drying after each pass
Drying Time per Page: Select from 0 to 60
minutes for the amount of time the printer
pauses to allow drying after each page is
printed
Paper Size Check Select On to detect the paper width when
paper is loaded
Select Off if a paper setting error occurs when
paper is correctly loaded
Note: If this setting is set to Off, the printer
may print beyond the edges of the paper,
causing ink to get on the printer.
Auto Cut Select On to automatically cut roll paper after
each page is printed, or select Off to cut paper
manually
123