Epson SureColor T3470 User Manual page 116

Advanced Media Setting menu (in the Roll Paper menu)
Setting
Platen Gap
Top/Bottom Margins
Paper Suction
Back Tension
Drying Time
Options Description
1.2 Adjusts the distance between the print head
and the paper; displayed when Custom
1.6
Paper is selected as the Paper Type setting
2.1
Standard The Standard margins are as follows for the
top and bottom:
Top 3 mm/Bottom 3
mm • CAD/line drawings: 3 mm
Top 15 mm/Bottom 15 • Other: 30 mm
mm
Select a different value as necessary.
Top 35 mm/Bottom 15
mm
Note: Left and right margins are always 3
mm.
-4 to +3 Select this to adjust the distance between the
paper and the print head. Choose lower
values for thinner papers.
Auto Select High or Extra High if paper wrinkles
during printing
Standard
High
Note: If the paper still wrinkles when you
select High, select Extra High and then
Extra High
change the level of suction by adjusting the
Settings > General Settings > Printer
Settings > Paper Source Settings > Roll
Paper Setup > Back Tension 2 setting.
Drying Time per Pass Select from 0 to 10 seconds for the amount of
time the print head pauses to allow drying
after each pass
Drying Time per Page Select from 0 to 60 minutes for the amount of
time the printer pauses to allow drying after
each page is printed
116