Appendix C: Differences With Fx2N-16Ccl-M; Appendix C-1 Differences With Fx2N-16Ccl-M - Mitsubishi FX3U User Manual

FX -16CCL-M User's Manual
3U
Appendix C: Differences with FX
This appendix describes the major differences between the FX
Appendix C-1 Differences with FX
The difference between FX
CC-Link applicable version
Connectable station classification
Maximum number of connectable
stations
Unit reset function from sequence
program
Parameter registration to EEPROM
Parameter verification test
Expanded cyclic setting
Slave station refresh/compulsory
clear setting in case of programmable
controller CPU STOP
Consistency control function
Connectable PLC
Number of connectable units to the
main unit
-16CCL-M
2N
-16CCL-M and FX -16CCL-M is shown in the following table.
3U 2N
FX 3U -16CCL-M
Ver. 2.00 (Ver. 1.10 also supported.)
• Remote I/O station
• Remote device station
• Intelligent device station
• Remote I/O station: 8 maximum
(FX PLC: 4 maximum)
3G
• Remote device station + Intelligent device
station: 8 maximum
Not provided
Not provided
Not provided
Provided
Provided
Provided
FX , FX , FX PLC
3G 3U 3UC
Only one FX -16CCL-M
3U
connected in a main unit.
(An FX 3U -16CCL-M cannot be attached to
main unit with an FX 2N -16CCL-M.)

Appendix C: Differences with FX2N-16CCL-M

Appendix C-1 Differences with FX2N-16CCL-M

-16CCL-M
2N
-16CCL-M and the FX
3U
Ver. 1.00
• Remote I/O station
• Remote device station
• Remote I/O station: 7 maximum
• Remote device station: 8 maximum
Provided
Provided
Provided
Not provided
Not provided
Not provided
FX 1N , FX 1NC
FX PLC
3UC
unit can be The number of connectable units is based on
the main unit.
(The maximum units number which can be
connected.)
-16CCL-M.
2N
FX 2N -16CCL-M
, FX 2N , FX 2NC , FX 3G , FX 3U ,
249
11
12
13
14
15
16
A
B
C