Tuning Of The Channels; Automatic Tuning - Sanyo CP29KX2Z Instruction Manual

Tuning of the Channels

Up to 256 broadcast stations in your reception
area can be stored in the electronic memory.
There are three ways of tuning as follows;
1. Automatic Tuning (the basic way):
All receivable channels are automatically tuned
in and memorized in consecutive programme
position.
2. Semi-Auto Tuning:
Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.
3. Manual Tuning:
Manually tune a channel if it cannot be auto-
matically tuned, such as when the signal is
poor.

Automatic Tuning

Press the MENU button for MAIN menu
1
display.
PICTURE
AUDIO
PRESET
LANGUAGE
GAME
SELECT ENTER
Select "PRESET" by pressing the
2
Programme UP or DOWN button.
PICTURE
AUDIO
LANGUAGE
GAME
Press the VOLUME + or - button for
3
PRESET menu display. On entering
PRESET display, Automatic Tuning will be
selected initially.
SEARCH START
POSITION 1
AUTO
SYSTEM
SIF
BG
Normally, set the colour system to "AUTO", if the
clear picture cannot be obtained, change the
colour system until the optimum image can be
produced.
14
EXIT
M
To select colour system
1) Select SYSTEM with the Programme UP
or DOWN button.
2) Press the VOLUME ( + or - ) button to
select a optimum colour system.
MODE AUTO
SEARCH START
POSITION 1
SIF
BG
AUTO
PAL
(Refer to Broadcast Transmission System List
indicated by page 11 in a setup of colour system.)
When the sound is not clear or no sound is pro-
duced on a programme number position, change
the sound system.
To select sound system
1) Select SIF with the Programme UP or
DOWN button.
2) Press the VOLUME ( + or - ) button to
select an optimum sound system.
MODE AUTO
SEARCH START
POSITION 1
SYSTEM AUTO
B/G
(5.5MHz) (6.0MHz)
(Refer to Broadcast Transmission System List
indicated by page 11 in a setup of sound system.)
Select "SEARCH" by pressing the
4
Programme UP or DOWN button.
MODE AUTO
POSITION 1
SYSTEM AUTO
SIF BG
Press the VOLUME (+) button to start
5
channel tuning.
-/--
CH
CH
After all receivable channels have been found
and stored, the TV set automatically returns to
programme position "1".
The Automatic Tuning operation can be
cancelled at any time by pressing the
Programme UP or DOWN button.
NTSC4.43
D/K
I
(6.5MHz) (4.5MHz)
1
NTSC
M