Tuning Of The Channels; Automatic Tuning - Sanyo CP25ST3T Instruction Manual

Tuning of the Channels
. . . .
Up to 100 broadcast stations in your reception area can be stored in the electronic memory.
There are three ways of tuning as follows;
Automatic Tuning (the basic way): All receivable channels are automatically tuned in and memorized in consecutive
programme position.
Semi-Auto Tuning: Use to preset a receivable channel in any desired programme position, e.g. the position with the
same number as the channel.
Manual Tuning: Manually tune a channel if it cannot be automatically tuned, such as when the signal is poor.
i Press and hold the PRESET button for more than 1 second, or press and hold the SWAP button for more than 2
# seconds.
d+
TVIAV PT
F
@
B
or
PRESET
ED
v
SWAP
P
v
@
I
SWAP
P
Programme
Position
Channel
AUTO
1
Band
Lllll ------
Normally, set the colour system to "AUTO" position. For Colour System Selector operation, refer to page 18.
Normally, set the sound system to "S-1" (AUTO) position. For Sound System Selector operation, refer to page 18.
2
Press the LEVEL(+) button on the remote control or TV set.
-4+
:W
m-
4
@
or
--F+
a
PIC MODE SWAP
LEVEL(+)
The channels are preset in consecutive position
beginning from the programme position"1".
After all available channels have been preset, the
unit returns to the position"1".
AUTO 1
Lll-------
AUTO 2
u
Lllllll -----
AUTO 3
Llllllllllll---
5' To cancel automatic tuning midway, press the
PRESET
button or turn off the TV by pressing the Power ON/OFF
button.
18
~.. -. ..,-