Tuning Of The Channels; Automatic Tuning - Sanyo CA21KF2G Instruction Manual

Table of Contents

Advertisement

Tuning of the Channels

Up to 256 broadcast stations in your
reception area can be stored in the elec-
tronic memory.
There are three ways of tuning as follows;
1. Automatic Tuning (the basic way):
All receivable channels are automatically tuned
in and memorized in consecutive programme
position.
2. Semi-Auto Tuning:
Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.
3. Manual Tuning:
Manually tune a channel if it cannot be auto-
matically tuned, such as when the signal is
poor.

Automatic Tuning

Press the MENU button for MAIN menu
1
display.
PICTURE
AUDIO
PRESET
LANGUAGE
GAME
SELECT
ENTER
Select "PRESET" by pressing the
2
Programme UP or DOWN button.
PICTURE
AUDIO
LANGUAGE
GAME
Press the VOLUME + or - button for
3
PRESET menu display. On entering
PRESET display, Automatic Tuning will
be selected initially.
SEARCH
START
POSITION
1
SYSTEM
AUTO
SIF
BG
Normally, set the colour system to "AUTO",
if the clear picture cannot be obtained,
change the colour system until the optimum
image can be produced.
EXIT
M
To select colour system
1) Select SYSTEM with the Progamme
UP or DOWN button.
2) Press the VOLUME ( + or - ) button to
select a optimum colour system.
MODE
AUTO
SEARCH
START
POSITION
1
SIF
BG
PAL
AUTO
(Refer to Broadcast Transmission System List
indicated by page 12 in a setup of colour system.)
When the sound is not clear or no sound is
produced on a programme number position,
change the sound system.
To select sound system
1) Select SIF with the Progamme UP or
DOWN button.
2) Press the VOLUME ( + or - ) button to
select an optimum sound system.
MODE
AUTO
SEARCH
START
POSITION
1
SYSTEM
AUTO
I
B/G
(5.5MHz)
(6.0MHz)
(Refer to Broadcast Transmission System List
indicated by page 12 in a setup of sound system.)
Select "SEARCH" by pressing the
4
Programme UP or DOWN button.
MODE
AUTO
POSITION
1
SYSTEM
AUTO
SIF
BG
Press the VOLUME (+) button to start
5
channel tuning.
-/--
CH
CH
After all receivable channels have been found
and stored, the TV set automatically returns
to programme position "1".
The Automatic Tuning operation can be
cancelled at any time by pressing the
Programme UP or DOWN button.
NTSC4.43
NTSC
D/K
M
(6.5MHz)
(4.5MHz)
1
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents