Summary of Contents for Raypak BACnet Interface Module
Page 1
30 31 RJ45 Communication Cable WarnIng This raypak control is strictly an operating control; it should never be used as a primary limit or safety control. all equipment must have its own certified limit and safety controls required by local codes.
• RJ45 cables (Ethernet Cable), InSTaLLaTIOn The BACnet Interface Module communicates with the Raypak Hybrid control using the RJ45 cable. Thus, it needs to be installed in close proximity to the control. • Mount the BACnet Interface Module on a flat surface next to the control.
RJ45 Communication Cable Connecting to Control • The BACnet Interface Module communicates all of its information to the control using RJ45 cable (the cable is provided with the module). • Both the BACnet Interface Module and the control have RJ45 sockets.
A GND B COMM and the control. Green LED Flashes on communication between the BACnet Interface Module and the BACnet network. Red LED Flashes steadily to indicate the BACnet Interface Module is operational. BaCnet Interface Module Installation and Configuration Manual...
LeD Lights • The RJ45 connection to the control powers the BACnet Interface Module. If all LEDs are off, then check the cable connecting the module to the control. The cable consist of 8 wires. Check each of the color-coded wires continuity in the cable using a continuity meter.
Ext B EXTENSION MODULE CUR / VLT CUR / VLT CUR / VLT CUR / VLT CUR / VLT CUR / VLT RS-485 9 10 11 12 11 12 RJ11 RJ11 Extension Cable BaCnet Interface Module Installation and Configuration Manual...