Table of Contents
Advertisement
DAILY
PROGRAM
(MONDAY-SUNDAY)
To record a program at the same time on the same chan-
nel every day, follow steps [1] to [5] on page 19, then
step [6a] below.
Select item 2(DAILY) with
number buttons.
I_ILY PROGAAIO
_]
1_O3RAM MJtaBER I
IENOTIME
_ _1_:._
-
TAPE SPEED
- -
OATE
--I--
Continue with step [7] on page 20 onwards.
WEEKLY
PROGRAM
To record a program at the same time on the same chan-
nel every week, follow steps [I] to [5] on page 19, then
step [6b] below.
Select
item 3(WEEKLY)
_o,,_E'
...... E.,,,"_'_-.
_._ :
TAPE SPEED
--
with
number buttons.
_TE
.....
Continue with step [7] on page 20 onwards.
CHECKING
TIMER PROGRAMS
To check a program that is to be recorded using the
Automatic Timer Program when the VCR is in the
timer-record mode:
1) Turn on the TV and set the TV channel to the same
video output channel located on the back of the
VCR. (CH 3 or 4)
2) Press POWER/TIMER
REC button so that the
"@" indicator disappears
from the display.
3) Press the TV/VCR button so that "VCR" appears
on the display.
4) Follow instructions in steps [2] to [5] on page 19.
Information which was set for programming
will
now appear.
TO STOP RECORDING
Press STOP button on the VCR.
• If you are recording using the Automatic Timer Pro-
gram, you may not operate the unit manually, but,
you may still stop the recording
by pressing
STOP/EJECT button on the VCR.
NOTE:
STOP button on the remote control will not
function in the Automatic Timer Recording mode.
TO CORRECT
OR CANCEL
A PROGRAM
• Press ADD/DELETE
button to go back one step
from current step during steps [5]~[14].
• If you finished setting program, repeat steps [2] to
[4] on page 19. Then press SELECT button repeat-
edly until your desired digit flashes and reset pro-
gram.
• You may cancel the entire program by pressing
ADD/DELETE button at step [5].
AUTOMATIC
TIMER RECORDING
HINTS
• If there a power failure or the VCR is unplugged for
more than 3 seconds, the clock setting and all timer
settings are lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape
and the VCR power will be turned off. The "[]" in-
dicator will flash.
• If a tape is not inserted or the erase-protection tab is
removed, the "@" indicator flashes and automatic
timer recording cannot occur. Insert a tape that al-
lows recording.
• The TV that is connected to your VCR may be turned
ON or OFF when the VCR is in the timer-record mode.
- 21 -
EN
***'if*
5CI6
Advertisement
Table of Contents
