Manual Buttonholing - Kenmore 385. 19601 Owner's Manual

SECTION 5.
LEARN THE ST{TCHES
Manual Buttonholing
NOTE :
Sat "ths _Ma=hlne
Th_e_d;ens:on
21o_
Do not put fin_Jer, screw driver or
any other object near under
the
sensor when sewing buttonholes bv
using sliding buttonhole toot J0
otherwise the sewing procedure m
the pattern Indicator may advance
to the next step,
_®
(_ a, Carefully mark the buttonhole _ength on
your garmeoL
b. Change to the s|iding buttonhole toot,
eo ln'_ert the garment under the too_ with
the buttonhole mark{ng runmno toward
you.
Slide both threads tO the left,
® a- Move the slider (A) away from you so
that the bottom mark |C) on the slider
meets the start mark (B).
b, Line up tha merkings on the foot with
the bottom mark on your _jarment,
c. Lower the pre_er too_ and press BH 1
(bar-tack) burton.
NOTE: The markings on the slider are engraved
an centimeters,
® The machine will automaticafly barrack and
sew up the leh side ot the buttonhole.
Stop the machine at the top mark,
72