Recalling Effect Settings (Scene Memories) - Roland VT-4 Owner's Manual

Recalling Effect Settings (Scene Memories)

Effect settings (scenes) that you've saved in the scene memory buttons
can be recalled instantly.
You can save up to eight scenes.
Scene 1
Scene 5
MEMO
You can back up the scene memories to your computer (p. 9).
Recalling a Scene
1. Press the scene memory [1]–[4] button that you want to
recall.
The scene memory button lights, and the effect settings (the scene)
is recalled.
To recall scenes 5–8, hold down the [MANUAL] button and press a
scene memory [1]–[4] button.
For example, to recall scene 5, hold down the [MANUAL] button and
press the scene memory [1] button (the [MANUAL] button blinks
slowly).
* When you recall a scene, the current positions of the slider/[AUTO
PITCH] knob/[KEY] knob will not match the actual sound.
* When you adjust the effect after recalling a scene, the setting of the
controller is applied to the sound. At this time, the scene memory
button blinks.
6
Scene 4
Scene 8
Saving a Scene
Here's how to save the effect settings to a scene memory button.
1. Use the controllers to adjust the effect.
2. Hold down the scene memory [1]–[4] button in which
you want to save the scene.
When the scene has been saved, all the scene memory buttons
change from blinking 0 unlit.
For example, if you want to save the settings to scene 5, hold down
the [MANUAL] button and hold down the scene memory [1] button.
Copying a Scene
Here's how to copy a scene to another number.
1. Press a scene memory [1]–[4] button to recall the scene
that you want to copy.
2. Hold down the copy-destination scene memory [1]–[4]
button.
When the scene has been copied, all the scene memory buttons
change from blinking 0 unlit.