Roland VT-4 Owner's Manual page 9

[KEY]
Parameter Value
knob
External
E Off, On
carrier
Formant
F 1–4
depth
G Monitor mode Off, On
A Playback level 0–20
3. Edit the setting of the parameter that you selected.
Operation Explanation
On
On/off setting
Off
Explanation
Specifies whether the
vocoder effect is applied
(on) or is not applied (off )
to the carrier signal being
input via USB.
Specifies the range
in which the formant
changes.
Specifies whether the
[VOLUME] knob affects
the volume of only the
PHONES jack (on).
If this is on, the volume
of the LINE OUT jacks
is fixed.
Adjusts the volume
balance between the USB
audio input and the mic
input.
Press the [HARMONY] button
Press the [VOCODER] button
Operation Explanation
Increase by 1
Decrease by 1 Press the [VOCODER] button
Checking the volume
The total value of the scene memory [1]–[4]
buttons that are lit indicates the "ones" place.
The [MEGAPHONE] button is lit if the value is
10–19, and the [ROBOT] button is also lit if the
Value setting
value is 20.
For example, if the value is "18, " scene memory [1],
[3], and [4] buttons and the [MEGAPHONE] button
are lit.
4. When you have finished making settings, press the
[MANUAL] button.
The setting is saved and VT-4 restarts.
Backing Up or Restoring the Scene Memories
You can use your computer to back up scene memories and restore
them from your computer.
Backing up
1. With the VT-4 powered-off, connect the VT-4 to your
computer via a USB cable.
Convenient Functions
Press the [HARMONY] button
9