Glossary Of Terms For Woodworking; Contents; Unpacking And Checking Contents; Tools Needed - Craftsman 113.235501 Owner's Manual

,
edge of the workpiece
the blade firsti
s or woodworking
m
5. Blade Tooth Set - the distance that the edge
of the sawblade tooth is bent (or set) outward
from the side of the blade,
3, Sawblade Path - the area of the workpiece
directly in line with and moving toward the
sawblade edge.
4. Bevel - the ability to slant the table to make
angle cuts. An angle cutting operation through
the face of the board.
6. Trailing Edge, the workpiece edge fast cut by
the sawblade.
7. Workpiece - the item on which the cutting
operation is being performed.
i ...............
contents
Warranty Information.; ........................................... 2
Safety Instruction for Scroll Saws .......................... 2
Motor Specs and Electrical Information .................. 5
Glossary of Terms for Woodworking ...................... 6
Unpacking and Checking Contents ....................... 6
Assembly ............................................................ _.., 7
Setting Table for Hodzontal or Bevel Cutting... 8
Aligning the Bevel Indicator. ............................. 8
Removing and Installing Blades ............................. 10
Mounting the Scroll Saw ....................................... 12
Getting to Know Your Scroll Saw ......................... 13
Operation ............................................................ 15
Making Interior Cuts ....................................... 1 7
Maintenance ................................................... 18
Wiring Diagram ..................................................... 1 8
Recommended Accessories .................................. l 9
Trouble Shooting .................................................. 1 9
Repair Parts ......................................................... 20
Notes .................................................................. 22
Service Information .............................................. 24.
unpackingand checking contents
TOOLSNEEDED
MEDIUM FLAT BLADE SCREWDRIVER
WARNING: For your own safety never
connect plug to power source outlet until all
assembly steps are complete and you have
read and understand the safety and
operational instructions.
IMPORTANT: Never lift this saw by the arm
which holds the blade or damage will occur
to your saw.
Separate all parts from packaging matenals ano
check each item with illustration and "Table of
Loose Parts". Make certain all itemsare accounted
for before discarding any packagingmaterial.
If any parts are missing, do not attempt to
assemble the Scroll Saw, plug m the power cord or
turn the switch on until the missing parts are
obtained and installed correctly.
Table of Loose Parts Qty.
A 16" Scroll Saw ........................................... 1
B Blade Guard .............................................. 1
C Owner's Manual ........................................ 1
D Loose Parts Bag containing:
Blade ........................................................ 1
Switch Key ................................................ 1
NOTE: Hardware to mount this scroll saw to a
bench or leg set is _supplied. See mounting
instructions for recommended hardware size.
6