Advertisement
Rio1608-D
■ UPDATING FIRMWARE
1. 1. Preparation
1-1.
Required items
• Rio1608-D
• Ethernet (CAT5e) straight cable: 1 pc.
• PC: 1 unit, Windows XP with Ethernet port Windows
Vista or Windows 7
1-2.
Network setting
Use the same network setting as for Test Program. (See p. 38)
1-3.
Application
Download Rio1608-D Test Program Data Package from YSISS
website and copy it right under the C drive.
Application programs to execute updating
• BOOT: ¥tools¥Updater¥boot¥update.exe
• PROG: ¥tools¥Updater¥prog¥update.exe
Firmware to be updated
• BOOT: ¥Firmware¥boot¥RIO_BOOT.BIN
• PROG: ¥Firmware¥prog¥RIO_PROG.BIN
If the version is different, be sure to update to the latest version.
1-4.
Connection
Connect the PC and Primary port of Rio1608-D with Ethernet
(CAT5e) straight cable.
* Only the above connection is required. Do not connect
anything to other terminals.
68
PC
Rio1608-D
2. Updating procedure
2-1.
Settings and starting of DIP switch
1)
Set the DIP switch to the update mode.
No.8 on, others off
2)
Turn on the power switch of Rio1608-D.
3)
Check that all of +48V indicators fl ash, which means that
DIP switch has been activated in the update mode.
If all of +48V indicators do not flash, +48V LED
peripheral circuit may be faulty.
2-2.
Starting application
The executing application for BOOT is different from that for
PROG.
Start the application program for updating.
When "update.exe" is activated, the screen as shown below will
appear.
2-3.
Confi rming updated fi rmware information
Check that the product name and version are indicated properly
in the fi le box.
(Example of screen)
Advertisement
Chapters
