Honeywell ScanPal EDA51 User Manual page 56

Configuring Wi-Fi network proxy servers
If users need to connect to network resources through a proxy server, they need to configure a proxy server for
each Wi-Fi network added. By default, none of the Wi-Fi networks added by users has done proxy server settings.
1. Enter Application Settings screen, tap Wi-Fi to show available Wi-Fi networks.
2. Long press the network name, then tap Connect the Network, then a network setting list will pop up.
3. Choose Show Advanced Options at the bottom of the network setting list.
4. If the network does not have proxy server settings, tap None on the proxy server setting list, and then tap
Manual Settings.
5. Enter the network proxy server settings.
6. Tap Save.
Note: Proxy server settings only apply to the Wi-Fi networks that users modified. Users should set proxy servers
for each network that requires the using of proxy server.
Disable Wi-Fi notifications
Wi-Fi is enabled by default. Users will receive notifications in the Status Bar when the terminal finds wireless
networks. Users can disable these notifications.
1. Enter Application Settings screen.
2. Tap Wi-Fi bar.
3. Tap the Settings icon on the top right.
4. Uncheck the Network notification to disable Wi-Fi Notifications.