Table of Contents
Advertisement
CHARGING
THE BAITERY
PACK
IMPORTANT
NOTE:
The battery pack must be charged for a full 12 hours before the cord-
less phone is used for the first time. Do not use the phone before
charging the battery pack.
1.
2.
Place the handset on the base
station and charge it for a M
XiLhQWS.
In order to verify that the
handset batte~- is fully
charged...
a)
b)
c)
Remove the handset from
the base station.
Check to see that the BATT
LOW indicator is off.
NOTE:
If the BAIT
LOW indicator
lights, even after charging
for a full 12 hours, refer to
the troubleshooting
guide on
page 41.
After initial setup, recharge
the handset battery by
placing it on the base station
cradle whenever the BAIT
LOW indicator lights.
Replacement
battery packs are
available from an authorized
Sanyo service center.
Replacement
battery pack part
numbec
SANYO 3N-270AA
Use of other brand or type batter-
ies may cause serious damage or
equipment
malfunctions.
BATT LO
indicator
NOTE:
When batteries are discharged,
they must be disposed of in a safe
manner that complies with all
applicable
laws.
SANYO 3N-270W
-8-
Advertisement
Table of Contents
