Table of Contents
Advertisement
PLACING A CALL
ANSWERING
AN INCOMING
CALL
1.
2.
3.
Press the TALK button (or pick
up the handset from the base
station). The TALK indicator
lights.
Dial the number you want to
call.
If you make an error in dialing
the number, press the END
button, then press the TALK
button to get a dial tone.
Press the END button to hang
up (or return the handset to the
base station cradle).
AUTO STANDBY
After finishing a call, you can hang
up by returning the handset to the
base station cradle. The handset
automatically
switches from talk
mode to standby mode. This
feature lets you use the handset
like a regular corded telephone
1. Press the TALK button (or pick
up the handset from the base
station). The TALK indicator
lights.
2. Talk.
3. Press the END button to hang
up (or return the handset to the
base station).
NOTES:
-
If the RINGER switch is set to
the off position, no ring is heard
when an incoming call is
received.
-
The cordless handset may ring
slightly after a corded telephone
connected to the same phone
line.
-
If the handset is too far away
from the base station, pressing
the END button may not hang
up a call. If this happens, come
closer to the base station and
press the END button, or return
(without pressing the END button).
to the base station and place
To answer the next call, simply
the handset in the base station
pick up the handset and talk.
cradle.
NOTE:
E
When you remove the handset
from the base station cradle, the
TA
phone automatically
enters the talk
mode. (This means that if some-
one tries to call you the line will be
Diali
busy.) To return to standby mode,
press the END button.
REMEMBER:
Your handset battery needs recharging when you hear a beep every 3
seconds during a conversation.
(The BAIT
LOW indicator also lights.)
-91.
Advertisement
Table of Contents
