CLT2420 5th 6/19/00 4:13 PM Page 1 INSTRUCTION MANUAL CLT-2420 2.4-GHz Digital Spread Spectrum Cordless Telephone with Call Manager Features www.sanyocanada.com...
Page 2
CLT2420 5th 6/29/00 4:43 PM Introduction Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features 2.4-GHz Digital Spread Spectrum Technology Page 2...
CLT2420 5th 6/19/00 4:13 PM Page 8 GETTING STARTED Setting up the base unit Notes: • The location should be close to both a phone jack and a continuous power outlet which is not switchable. • Be sure there is sufficient space to raise the base antenna fully to a vertical position. •...
Desktop use Connect the base unit To AC outlet AC adaptor (supplied) To telephone outlet Telephone line cord (supplied) Note: When connecting the power cord, make sure it does not create a trip or fire/electrical hazard. Avoid places where it could become chafed.
• Connect the AC adaptor to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adaptor easily. • If your telephone outlet is not modular, contact your telephone company for assistance. Choose the dialing mode...
CLT2420 5th 6/21/00 1:57 PM Page 11 GETTING STARTED Mounting the base unit on a wall Standard wall plate mounting TEL LINE DC IN 9V...
Page 12
CLT2420 5th 6/19/00 4:13 PM GETTING Handset retainer Note: When the phone is mounted on the wall, the handset belt clip must be attached to hold the handset in the charging position. Do not place the handset with the display facing inside. Direct wall-mounting 3/16 in.
CLT2420 5th 6/19/00 4:13 PM Page 13 GETTING STARTED Preparing the battery pack CHARGE/IN USE Note: CHARGE/IN USE Use only battery pack supplied or the specified Sanyo types with your phone. Type: SANYO 3KR-600AAL or SANYO/GE GES-PCF01...
CLT2420 5th 6/19/00 4:13 PM GETTING Battery use time (per charge) When the battery charge level becomes low Cleaning the battery contacts Note: Repeated short chargings may cause memory effect in the battery pack, which reduces use time of the battery.
CLT2420 5th 6/19/00 4:13 PM BASICS Making a call TALK/END Notes: • Press DELETE/SCAN if you enter a wrong number at step 1. • Press and hold DELETE/SCAN to delete all numbers at once. • You must press a key within 20 seconds or the phone will return to standby. Page 15 Dialing from standby mode TALK/END...
Call Waiting Note: You must subscribe to Call Waiting service to use this feature. When a call is received during a telephone call already in progress, you hear a beep. Press CID/FLASH to switch to the new call. If you also subscribe to Caller ID on Call Waiting (Visual Call Waiting), you will see the name and number of the second caller.
CLT2420 5th 6/19/00 4:13 PM BASICS Redialing a call TALK/END Note: • If the dialed number exceeds 32 digits, only the first 32 digits are retained for redialing. • If no numbers have been dialed using this phone, you hear an error beep and no redialing will be made.
CLT2420 5th 6/19/00 4:13 PM BASICS Page 20 Redialing from talk mode TALK/END REDIAL/PAUSE TALK/END Note: • Only the last number dialed can be accessed after TALK/END has been pressed. • If no numbers have been dialed using this phone, you hear an error beep and no redialing will be made.
CLT2420 5th 6/19/00 4:14 PM Page 21 DIRECTORY Storing phone numbers and names MEMORY SELECT DELETE/SCAN REDIAL/PAUSE TONE/ / Note: In memory dialing operation, you must press a key within 20 seconds, or the phone will return to standby. If you return the handset to the base, it will return to standby, too.
Page 22
CLT2420 5th 6/19/00 4:14 PM DIRECTORY SELECT REDIAL/PAUSE Note: The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between certain digits. DELETE/SCAN DELETE/SCAN SELECT MEMORY Page 22 REDIAL/PAUSE...
CLT2420 5th 6/19/00 4:14 PM DIRECTORY Making calls from the directory REDIAL/PAUSE TONE/ / Notes: • If you press SELECT before TALK/END, you can confirm the name and number stored in the selected memory location. • To exit the memory function without dialing, press MEMORY. The handset returns to standby.
Page 24
CLT2420 5th 6/19/00 4:14 PM Page 24 DIRECTORY Display a programmed number Note: Memory dialing from Talk mode TALK/END SPEAKER MEMORY...
CLT2420 5th 6/21/00 1:57 PM CALLER ID Caller ID Note: You must subscribe to Caller ID on Call Waiting (Visual Call Waiting) if you want to see the name/number of the second caller while you are already on the phone. (See page E32.) Setting Caller ID options Note: When you subscribe to Caller ID service, you may not want to answer every incoming call...
CLT2420 5th 6/21/00 1:57 PM CALLER ID SERVICE MENU. Select Service 1 Voice Mail 2 Network Svc 1 Auto Talk:Off 2 CIDCW 3 Area Code: SELECT SELECT SELECT 4 Language SELECT 2 CIDCW 3 Area Code: 4 Language :Eng Note: CIDCW Settings •...
• When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear. • When the call is received via a telephone company that does not offer Caller ID service, the caller's phone number and name do not appear. (This includes international calls.)
Note: • In Caller ID operation, if no key is pressed for more than 20 seconds, an error tone sounds and the telephone returns to the standby mode. Note: The phone numbers and names of caller list can be up to 15 characters each.
CLT2420 5th 6/27/00 8:13 PM CALLER ID Deleting information from the Caller ID list Deleting a Caller ID entry Note: If you receive an incoming call, the deleting operation is cancelled. Page 32 FEATURES CID/FLASH DELETE/SCAN SELECT DELETE/SCAN When the pointer is at When the pointer is at...
CLT2420 5th 6/27/00 8:13 PM CALLER ID Deleting all Caller ID names/numbers Note: If you receive an incoming call, the deleting operation is cancelled. Page 33 FEATURES CID/FLASH DELETE/SCAN SELECT DELETE/SCAN When the pointer is at When the pointer is at...
Calling a party from the Caller ID list Notes: • When a long distance number is selected, • You cannot make a call from the Caller ID list if your CLT-2420 is connected to private branch exchange (PBX). Long distance numbers...
Page 35
• You cannot store a Caller ID entry that includes no phone number. • If there is an incoming call or page during memory storing, the operation is cancelled and the telephone is set to receive the incoming call or page. SELECT...
CLT2420 5th 6/19/00 4:14 PM CALLER ID Using Caller ID on Call Waiting service Note: When you subscribe to Call Waiting with Options service and CIDCW is set to Opt. in the Caller ID setup menu, you can press the CID/FLASH key after receiving a call waiting signal and view a list of options for handling the new call.
SERVICE MENU Note: A subscription may be required and fees may apply for using each of the features listed below. Contact your local telephone company for more details or subscription. List of features Voice Mail* Access (page E34) Network Features (page E36)
Programming your access number SERVICE MENU SELECT SELECT Note: You must subscribe to a voice mail service from your telephone company in order to use this feature. Retrieving your voice mail messages VOICE MAIL TALK/END Page 38 FEATURES SERVICE MENU...
CLT2420 5th 6/19/00 4:14 PM ADVANCED CALLING PAGE/FIND Key Paging To locate the handset Notes: • By holding PAGE/FIND for more than 2 seconds and up to 60 seconds, the handset beeps for 60 seconds. If you press and hold for more than 60 seconds, the handset beeps until you release the key.
CLT2420 5th 6/27/00 8:13 PM ADVANCED CALLING Accessing calling features Note: You must select a service from the menu before pressing TALK/END. Notes: • When using certain calling features, local toll or long distance charges may apply. • Certain calling features may not be used on some long distance calls or from certain types of business lines.
CLT2420 5th 6/19/00 4:14 PM Page 45 ADDITIONAL INFORMATION Changing the digital security code PAGE/FIND PAGE/FIND Note: If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged.
CLT2420 5th 6/21/00 1:57 PM ADDITIONAL Installing the belt clip To attach the belt clip Note: If you have wall-mounted the base, you must install the belt clip to hold the handset in the proper charging position. Do not hang the handset with the display facing inside.
Page 47
CLT2420 5th 6/19/00 4:14 PM ADDITIONAL Note on power source Battery replacement and handling Maintenance Page 47 INFORMATION RECYCLING NICKEL- CADMIUM BATTERIES Ni-Cd...
Page 51
CLT2420 5th 6/19/00 4:14 PM Page 51 SOS guarantees you: Nationwide Customer Support Stay-At-Home Convenience Hassle-Free Exchange Guaranteed Quality With SOS, we’ve got you covered!
Page 52
CLT2420 5th 6/19/00 4:14 PM Page 52 Covered under one or more of the following U.S. patents: 2000 SANYO All rights reserved UCZZ01681DZ Printed in China...