Table of Contents
Advertisement
CLEANING
TIPS
PART
BRUSHED
CHROME
COOKTOP
CLEANING
MATERIALS
Detergent, warm water, plastic
or nylon scouring pad or bell In
Dip-it@ solution to remove stub-
bern soil
REMARKS
Do not scour chrome tops.
Stubborn
stains may be removed by using Esprse
Magwheel Cleaner® or Turtle Wax Pol-
Ishing Compound®.
To remove finger
prints on brushed chrome, apply a little
baby oll with a paper towel.
Rub In the
direction of the brush marks. Armor All
Protectant®can also be used (afterclean-
Ing).
Be sure to clean spills of acidic
foods quickly. Vinegar spills can perma-
nently stain chrome.
GLASS OVEN DOOR/WIN-
Glass cleaner and paper towels
Remove stubborn soil with paste of bak-
DOW (SOME
MODELS)
Ing soda and water. Do not use abrasive
cleaners.
Rinse thoroughly.
BROILER
PAN AND GRID
Detergent,warm water, soft cloth
or a chrome cleaner or special
cooktop cleaning creme
Remove soiled pan from oven to cool.
Drain fat or drippings. FIll panwlth warm
water. Sprinkle grid with detergent and
cover with damp cloth or paper towels.
Let pan and grid soak for a few minutes.
Rinse or scour as needed. Dry well. Grid
and pan may be washed In a dishwasher.
REMOVABLE
COOKTOP
BURNER
COMPONENTS
Be sure that all controls are turned off and that the unit
IS cool.
To remove:
Lift off burner grate, burner top and trim ring. Do not
remove burner bowl.
See the Cleaning Tips Chart In this manual. Be sure to
dry burnertope completely before re-assembling burner.
The electrode
of the spark igniter
is
exposed
beyond
the
top
of
the
burner.
When
cleaning
the
burner
bowl,
be careful
not to snag
the
electrode
of the spark
igniter
with
your cleaning
cloth.
Damage
to the
igniter
could occur.
Be careful
not
to turn on any cooktop
controls
while
cleaning
burner
bowls.
A slight
electrical
shock might result,
which
could cause
you to knock
over hot
cookware.
To replace:
1. Place the trim ring on the burner body.
2. Position the burner top on the burner body. To correctly
seat the burner top, examine the four notches on the
underside of the burner top. One of them is shaped 18
dlfferentlythan the other thrse. Itincludesan Indexingkey
for the spark ignner. The notch with the Indexing key
fits over the spark Ig niter when positioning burner top.
3. Place burner grate over burner assembly and Into
burner bowl. The bottoms ofthe four larger burner
grate fingers fit Into four corresponding Indentations
in the burner bowl.
SPARK
IGNITER
ER GRATE
BURNER TOP
TRIM RiNG
BURNER BOWL
BURNER
BODY
NGCCH33
Advertisement
Table of Contents
