Bda Controller Operation - Kaval BDA-1000 User Manual

•

BDA CONTROLLER OPERATION

The BDA Controller is a microprocessor based part of a Kaval BDA that provides all control, fault monitoring, and settings for the
BDA. It interfaces to the 28 VDC Power Supply, the optional 24 VDC Battery (both monitoring, transferring, and charging), control
signals to the Boosters, and provides monitored DC power for the Boosters and PA's. Overall dimensions of the case are 9"
(including flanges) x 3.5" x 1.25". The heatsink extends about 1.75 inches above the case and is 4 inches wide.
PWR FAIL
BDA CONTROLLER
The BDA Controller display is a 2 line by 20 character Vacuum Fluorescent (VFD) display. The connectors are all secure lock
types and should only be plugged and unplugged by a service technician.
l Page 8
UPLINK
BATT BATT BOOST
BDA OK
SELECT
EXIT
Kaval Telecom Inc.
AGC
DOWNLINK
PA
BOOST PA
TEMP FAN
ON
OFF
ADJUST POWER
DCM000000001