Introduction - Kaval BDA-1000 User Manual

Bi-directional amplifiers 800 & 900 mhz
Table of Contents

Advertisement

INTRODUCTION

This Operator's Manual covers the use, operation and installation of the BDA-1000 800 & 900 MHz Bi-Directional Amplifiers
(BDA's). BDA's are intended to extend radio frequency coverage into areas with coverage deficiency such as inside office
buildings, shopping malls, hospitals, tunnels etc. They are designed to be located independent of the Donor Transceiver Site and
are equipped with their own antenna systems - one to communicate with the Donor Transceiver Site and the other(s) to
communicate with radio equipment in the area with coverage deficiency.
For proper BDA System operation with no feedback problems, the RF isolation between the roof top antenna and the indoor
antenna(s) must exceed the net system gain by at least 12 dB. Note that the net system gain takes into account the BDA gain,
antenna gain, cable & connectors losses.
FROM / DONOR
TRANSCEIVER
l Page 4
ROOF TOP ANTENNA
D
KAVAL
BDA
Kaval Telecom Inc.
D
COAX
CABLE
SIGNAL
TAP
SIGNAL
TAP
F2
N
N-1
F1
B
DCM000000001

Advertisement

Table of Contents
loading

Table of Contents