Pairing A Bluetooth Device Using Nfc; Troubleshooting - ION Sport XL Quick Start Manual

Pairing a Bluetooth Device Using NFC

NFC (near-field communication) allows data exchange from devices, such as pairing, by gently bumping
them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Sport XL:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one time step).
3. Power on Sport XL.
4. Press and release the Bluetooth button on Sport XL and the Bluetooth icon will flash (only needed for
the first time when NFC pairing with the device).
5. Touch and briefly hold your device to the NFC logo.
6. Follow the pairing instructions that appear on your phone. If a passcode is required, enter "0000".
7. To unpair, gently bump your device against the NFC logo located on Sport XL's top panel or disconnect
the Bluetooth connection from your device's Bluetooth menu.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source, musical instrument, or
microphone. Also, try to reduce the overall volume of Sport XL using the Master Volume knob.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphone away from the speaker.
If there is poor AM reception: To adjust AM reception, move the entire unit.
If you can't hear the microphone over the music volume: Turn down the music volume from your source.
If you can't play music from a flash drive: The USB port is only for charging USB devices.
7