Table 1.
Motor and electrical specifications
Specifications
Volts
Hertz
Phase
HP
FLA/Amps
(a) Powered by a "line to 115 volt" transformer for all gas heaters except 115/60/1 rated units.
Description
The gas heat section consists of an inshot tubular heat
exchanger gas train components, and a control panel for
electrical connections. It is an integral part of the entire air-
handling system.
An access door is provided for service and maintenance of
the burner and gas train components.
The gas heat section must be in a blow-thru position
downstream from the supply fan. Downstream sections
must be separated by a blank access section and discharge
temperatures must be controlled so as not to exceed the
temperature limits of components in the downstream
sections.
CLCH-SVX014B-EN
Gas Heater Input Power
60
n/a
n/a
(a)
Inducer Motor
115
60
1
General Information
Control
Power(a)
115
60
1
n/a
6
7