Location Of Controls; Power Source - Craig MET1427 Owner's Manual

Animal portable speaker with bluetooth wireless technology
Table of Contents

Advertisement

7
The unit has a built-in Li-ion rechargeable battery, charge it before first time use or when
it is drained as follows:
1 . Connect the small plug from the supplied USB Connection Cable to the DC IN
(Micro USB) Port on the right of unit.
2. Connect the full size USB Plug from the supplied USB Connection Cable to the
USB Port on the Personal Computer or USB Charger (Personal Computer and
USB Charger not included).
3. When charging, the red
When charging is complete, it will turn off.
NOTES:
Your battery will last longer if you following these simple guidelines for caring and storing:
A. Before first time use, recharge the unit approximately 4 hours until the unit is fully charged.
B. Charge and store the unit within the temperature range of 5°C - 35°C (40°F - 95°F).
C. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until
battery fully drains will damage battery. Battery life will be extended if you keep the
battery fully charged.

LOCATION OF CONTROLS:

1
2
3
4
5
6

POWER SOURCE:

Charge Indicator on the top of unit will illuminate.
To Personal Computer or any USB Charger
3
1. MODE Indicators
2. MIC (Microphone)
3.
Charging Indicator
4.
Button
0
5.
Button
+
6.
Button
7. DC IN (Micro USB) Port (For charging only)
8. TF (Micro SD) Card Slot
9. Speaker
9
8

Advertisement

Table of Contents
loading

Table of Contents