Makita AG125 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Nail Gun
  5. AG125
  6. Instruction manual
Makita AG125 Instruction Manual

Makita AG125 Instruction Manual

Air nailer
Hide thumbs Also See for AG125:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Air Nailer
MODEL AG125
005365
I N S T R U C T I O N
M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading

Related Manuals for Makita AG125

Summary of Contents for Makita AG125

  • Page 1 Air Nailer MODEL AG125 005365 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    EN792 in accordance with Council Directives, 98/37/EC, Yasuhiko Kanzaki CE 2004 Director MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND...

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS ENB091-1 WARNING: WHEN USING THIS TOOL, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. • • For personal safety and proper operation and An improperly functioning tool must not be maintenance of the tool, read this instruction used.
  • Page 4 It is easy to lose your footing Makita. if you nail while inching backward. When nailing • Ask Makita's Authorized service centers for against perpendicular surface, nail from the top periodical inspection of the tool. to the bottom. You can perform nailing opera- •...

  • Page 5: Installation

    INSTALLATION Selecting compressor 005366 • The air compressor must comply with the requirements of EN60335-2- (L/min.) Select a compressor that has ample pressure and air output to assure cost-efficient operation. The graph shows the relation between nailing frequency and compressor air output at a compression of 0.83MPa (8.3bar).

  • Page 6: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always disconnect the hose before adjusting or checking function on the tool. Adjusting depth of nailing 005373 CAUTION: • Always disconnect the hose before adjusting the depth of nailing. To adjust the depth of nailing, turn the adjuster so that the arrow above the adjuster will point to the number indicated on the adjuster.

  • Page 7: Operation

    Loading nailer 005371 CAUTION: • Be careful not to touch the trigger when loading the nail. • When loading nail into the nailer, grip the nail by the shank, not the tip. Hold the nail shank lightly and insert the nail head into the nail guide until the nail is held firmly by the magnet.
  • Page 8 NOTE: • The nailer will not operate unless you apply sufficient pressure to the contact arm. If this occurs, apply forward pressure to the nailer again while pulling the trigger to start operation. Nailing with one or two impacts 005376 When you need to position a nail or drive a shallow nail Set the tip of the nail firmly against the driving surface.
  • Page 9 Jammed nailer 005379 CAUTION: • Always disconnect the hose before cleaning a jam. When the nailer becomes jammed, do as follows: Use pliers to bend the jammed nail so that the nail head comes out of the nail guide. Then remove the jammed nail. After removing the jammed nail, make sure that the nail guide and the contact arm move smoothly.

  • Page 10: Maintenance

    MAINTENANCE CAUTION: • Always disconnect the hose before attempting to perform inspection or maintenance. Maintenance of nailer 005383 Always check the tool for its overall condition and loose screws before opera- tion. Tighten as required. With tool disconnected, make daily inspection to assure free movement of the 005384 nail guide and trigger.
  • Page 11 To maintain product SAFETY and RELIABILITY, maintenance and repairs should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
  • Page 12 Makita Corporation 884277-229...

Table of Contents