GRA 5500
RX Port
GRA 5500
TX Port
TNC male connectors are required to build the coaxial cable assemblies and are not provided with the
GRA 5500 system.
Table A-1
attenuation, and cable type lengths in agreement with the overall requirements for the coaxial cable
assemblies. The maximum coaxial cable lengths in
end-to-end cut cable length (non-terminated cable lengths). Actual cable lengths may vary depending on
the manufacturer specifications and recommendations for the specific coaxial cable and connectors
(Table
A-2) used.
Table A-2
Figure 2-6
shows suggested installation instructions for typical TNC connectors.
GRA 5500 Installation Manual
Page 2-12
30 feet maximum length, 1 foot minimum length
5.0 dB maximum attenuation, VSWR <1.5:1
30 feet maximum length, 1 foot minimum length
5.0 dB maximum attenuation, VSWR <1.5:1
Figure 2-5 Coaxial Cable Requirements
provides guidance information concerning cable types, cable type
references common sources for cable and connector part numbers.
Table A-1
are for reference only and are defined as the
190-01277-00
Rev. A