Canon MF720 Series Service Manual page 288

Item
Related service mode
Supplement/memo
■ MISC-R
Item
SCANLAMP
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
Required time
SCAN-ON
Title
Details
Adj/set/operate method
Display/adj/set range
Default value
■ MISC-P
Item
SRVC-DAT *
Title
Details
Adj/set/operate method
SYS-DAT *
Title
Details
Adj/set/operate method
SYS-DMP *
Title
Details
Adj/set/operate method
CNTR
Title
Details
Adj/set/operate method
ERR-LOG
Title
COPIER > FUNCTION > CLEAR
COPIER > FUNCTION > INSTALL > E-RDS, RGW-PORT, COM-LOG
Embedded-RDS: Function to send device information such as the device counter, failure, and consumables
to UGW via SOAP protocol UGW (Universal Gate Way):
Remote monitoring service system
COPIER > FUNCTION > MISC-R
Lighting check of CIS Unit LED
To light up CIS Unit LED for 3 seconds. It lights up in the order of R, G, B, R, G and B.
When replacing the CIS Unit LED
Select the item, and then press Yes key.
0 to 1
0
3 seconds
Execution of copyboard reading
To execute reading of the original on the Copyboard Glass.
1. Place paper on the Copyboard Glass.
2. Select the item, and then press Yes key.
0 to 1
0
COPIER > FUNCTION > MISC-P
Output of system data list/system dump list
To execute report output of the system data list and the system dump list.
System data list: The service software switches and parameters used in FAX function System dump list:
The number of sends/receives, the number of pages sent/received, the number of sheets printed / read,
the number of errors, etc.
Select the item, and then press Yes key.
Output of system data list
To execute report output of the system data list.
The service software switches and parameters used in FAX function are output.
Select the item, and then press Yes key.
Output of system dump list
To execute report output of the system dump list.
The number of sends/receives, the number of pages sent/received, the number of sheets printed/read,
the number of errors, etc. are output.
Select the item, and then press Yes key.
Output of counter report
To output the counter report.
The usage of functions (reading, recording, communication and copy) is output.
Select the item, and then press Yes key.
Output of error log report
Description
Description
Description
280
8. Service Mode