Copying The Copp Best Practice Policy - Cisco Nexus 3600 NX-OS Security Configuration Manual

Copying the CoPP Best Practice Policy

Procedure
Step 1
Step 2
Step 3
Related Topics
Changing or Reapplying the Default CoPP Policy Using the Setup Utility, on page 139
Copying the CoPP Best Practice Policy
The CoPP best practice policy is read-only. If you want to modify its configuration, you must copy it.
Procedure
Step 1
Step 2
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
134
Command or Action
[no] copp profile [strict | moderate
| lenient | dense]
Example:
switch(config)# copp profile
moderate
show copp status
Example:
switch(config)# show copp status
show running-config copp
Example:
switch(config)# show
running-config copp
Command or Action
copp copy profile {strict | moderate |
lenient | dense} {prefix | suffix} string
Example:
switch# copp copy profile strict
prefix abc
show copp status
Example:
switch# show copp status
Configuring Control Plane Policing
Purpose
Applies the CoPP best practice policy.
You cannot disable CoPP. If you enter the no form of this
command, packets are rate limited at 50 packets per seconds
[for releases prior to Cisco NX-OS Release 7.0(3)I2(1)],
or an error message appears [starting with Cisco NX-OS
Release 7.0(3)I2(1)].
(Optional)
Displays the CoPP status, including the last configuration
operation and its status. This command also enables you to
verify that the CoPP best practice policy is attached to the
control plane.
(Optional)
Displays the CoPP configuration in the running
configuration.
Purpose
Creates a copy of the CoPP best practice policy.
CoPP renames all class maps and policy maps with the
specified prefix or suffix.
(Optional)
Displays the CoPP status, including the last
configuration operation and its status. This command
also enables you to verify that the copied policy is not
attached to the control plane.