Cisco Catalyst 6880-X Installation Manual page 7

Installing the Switch
Before You Begin
You will require:
• Number 1 and Number 2 Phillips screwdrivers
• 3/16-inch flat-blade screwdriver
• Tape measure and level
Procedure
Step 1 Secure the crossbar to the shelf brackets by using two M4 screws, with one screw on each side.
Figure 2: Securing the crossbar to the shelf brackets
1
2
Step 2 Position the front side of the support flanges of the shelf brackets on the fixed front-left and front-right posts
of the rack and secure them by using the four EA screws (Two EA screws on each side).
OL-30827-02
Shelf brackets 3
Crossbar
M4 x 5 mm flat-head screw
Catalyst 6880-X Switch Hardware Installation Guide
Installing the Rack-Mount Shelf Kit
7