Cisco Catalyst 6880-X Installation Manual page 12

Installing the Rack-Mount Shelf Kit
Note
Figure 7: Installing Shelf Brackets and Crossbar in a 17.5-inch Opening
1
2
3
4
Step 3 Adjust the adjustable rear-left and rear-right rack posts until it touches the shelf brackets flange surface and
secure by using four EA screws, with two EA screws on each side.
Catalyst 6880-X Switch Hardware Installation Guide
12
Ensure that the crossbar attached to the shelf brackets is on the rear side of the rack
post.
Fixed front-left rack post
Fixed front-right rack post
Adjustable rear-right rack
post
Adjustable rear-left rack
post
5 Shelf brackets
6 Crossbar
7 Two EA screws
Installing the Switch
OL-30827-02