Service Interval Chart - Scotts S1642, S1742, S2046 Operator's Manual

Service Interval Chart

Service Intervals
Please use the following timetables to perform routine
maintenance on your machine. Service procedures
included in this manual but not on this chart are to be
performed on an as needed basis.
Before Each Use
After First 2 Hours
After First 5 Hours
Every 8 Hours
Every 25 Hours
Every 50 Hours
Every 100 Hours
Every Season
Before Storage
SERVICE INTERVAL CHART
Check fuel level.
Clean air intake screen.
Test safety systems.
Check tire pressure.
Check/tighten loose hardware.
Check engine oil level.
Check blade belt tension.
Change engine oil.
Check oil level.
Check brakes.
Check tire pressure.
Sharpen/replace blades.
Lubricate front wheel spindles.
Lubricate wheel bearings.
Check battery and clean battery terminals.
Change engine oil when operating under heavy load or in high
temperatures.*
Clean/Service air cleaner elements.*
Check spindle brake measurement
Change engine oil.*
Check/tighten loose hardware.
Adjust drive belt tension.
Replace oil filter.
Clean/Service air cleaner elements.*
Replace spark plug.
Replace fuel filter.
Adjust blade belt tension.
Check spindle brake measurement
Check/tighten loose hardware.
Lubricate front wheel spindles.
Lubricate wheel bearings.
Clean battery terminals.
Service Interval Chart - 25
IMPORTANT: Avoid damage! If you operate mower in
extreme heat, dust or other severe conditions,
service more often than shown below.