Storing Phone Numbers In The Phone Book - Sony D-WAVE Zuma CM Z200 Operating Instructions Manual

Storing phone numbers in the Phone Book

Your phone features a built-in Phone Book memory,
in which you can store up to 99 (01–99) phone
numbers with names. You can dial stored numbers
quickly by recalling them from the Phone Book (see
page XX).
Each phone number can contain up to 32 digits, and each name up to 12 characters.
This section shows how to store, edit, and erase Phone Book numbers quickly.
1
On the standby display, use the number buttons to enter the number.
The number appears on the display. In addition, you can store hyphens,
pauses, and links with your Phone Book entries (see page XX).
2
Push .
The Options menu appears.
3
Turn to select Save, then push
The message Enter a Name appears on the display, prompting you for a
name to accompany the number.
4
Use the number buttons to enter the name.
If you press the same button in quick succession, you will scroll through the
characters available on that button. (See the "Alphanumeric table" on page
29.) For the next entry, wait until the cursor moves one step to the right or
use / or
If you enter the wrong character, press
by the cursor.
To enter "SONY"
Press four times to enter an "S."
7 PQ
RS
Press three times to enter an "O." Wait until the cursor moves one step to the
6
MNO
right for the next entry.
Press twice to enter an "N."
6
MNO
Press three times to enter a "Y."
9
WX
YZ
5
When you are finished, push
The message Save in location XX? appears on the display, indicating the
first available memory location.
6
Push to store the new number in the first available memory location.
If you want to store it in another location, turn
location or enter the location number, then push
appears, followed by the status of the Phone Book.
Tip
In addition, you can use the Directory menu to store Phone Book numbers (see page XX).
4_CM_Z200
.
to move the cursor and insert spaces between characters.
to clear the character highlighted
CLR
to store the phone number and name.
1
CLR
9
0 WX
-
OPER
YZ
/
to select the desired
. A confirmation message
4.1
6/8/98, 9:27 AM