Model 5300, 5350 Wall-Mounted Controls - Dometic FAN-TASTIC VENT Installation And Operation Manual

5.6 Model 5300, 5350 wall-mounted controls

9
5300
I
When the fan is running: Closing the lid by pressing the UP/DOWN button shuts OFF the fan blade.
Reopening the lid using the UP/DOWN button will revert the fan blade movement to its previous set
speed. Using the ON/OFF button will not do this; the ON/OFF button resets the fan to normal operation.
Name
Fan Power ON/OFF
Fan Speed
Vent Lid OPEN/CLOSE
(Model 5350)
Vent Lid OPEN/CLOSE
(Model 5300)
Air OUT/IN
(Model 5300)
Rain Sensor LED
9
5350
• Press to turn ON the fan (this will start the fan on HIGH).
• Press to turn OFF the fan (this will stop the fan and close the lid).
• Press UP to increase the fan speed.
• Press DOWN to decrease the fan speed.
(The fan has 13 speeds, not including OFF.)
• When the vent lid is closed, press this button once to open the vent lid.
• When the vent lid is open, press this button once to close the lid.
(The rain sensor can be turned ON or OFF by pressing this button for three
seconds.)
• When the vent lid is closed, press the UP button once to open the vent lid.
• When the vent lid is open, press the DOWN button once to close the vent
lid.
(The rain sensor can be turned ON or OFF by pressing this button for three
seconds.)
• When the vent lid is open, press this button once to reverse the fan blade
direction; press it again for the opposite direction. Once pressed, the
motor will slow and then reverse direction. If the button is pressed again
during the reversing cycle, a double-beep will indicate the cycle is in
progress. The function can only be changed after the reversing cycle is
complete.
• This LED will illuminate when the rain sensor has been turned OFF at the
wall control.
• The rain sensor can be turned ON or OFF by pressing the DOWN button
for three seconds.
Function
Fan
EN