Leds; Switch Chassis Leds - Cisco Nexus 9336C-FX2 Hardware Installation Manual

LEDs

•
•
•
•

Switch Chassis LEDs

The BCN, STS, and ENV, LEDs are located on the left side of the front of the switch. The port LEDs are
appear as triangles pointing up or down to the nearest port.
LED
BCN
STS
ENV
(port)
Switch Chassis LEDs, on page 47
Lane Link LEDs, on page 48
Fan Module LEDs, on page 48
Power Supply LEDs, on page 48
Color Status
Flashing blue The operator has activated this LED to identify this switch in the chassis.
Off This switch is not being identified.
Green The switch is operational.
Flashing amber The switch is booting up.
Amber Temperature exceeds minor alarm threshold.
Red Temperature exceeds major alarm threshold.
Off The switch is not receiving power.
Fans and power supply modules are operational.
Green
Amber At least one fan or power supply module is not operating.
Green Port admin state is 'Enabled', SFP is present and the interface is connected (i.e.
cabled, and the link is up).
Amber Port admin state is 'Disabled, or the SFP is absent, or both.
Off Port admin state is 'Enabled' annd SFP is present, but interface is not connected.
Cisco Nexus 9336C-FX2 NX-OS Mode Switch Hardware Installation Guide
C
A P P E N D I X
47