Scag Power Equipment TURF TIGER STT-29DFI Operator's Manual page 35

Section 6
C. 4-3/4" or 5-1/4" Position - (See Figure 6-9). Placing
the baffle in either the 4-3/4" or 5-1/4" setting will
enhance fall cutting (leaf pickup) and reduce cutter
deck "blowout".
To adjust the Custom-Cut Baffle height:
1. Place the cutter deck in the transport position.
2. Remove the hardware securing the Custom-Cut
Baffle to the cutter deck.
- NOTe -
Hardware location used in the illustrations are for
reference only. Location of hardware may vary
depending on cutter deck size.
3. Move the Custom-Cut Baffle to desired position. See
Figure 6-9.
4. Reinstall the mounting hardware. Torque hardware to
39 lb-ft.
1
2
3 4
A
B
Custom-Cut Baffle Adjustment
Mounting Slot Selected
Slot "A"
Height (inches)
Slot "B"
Height (inches)
Figure 6-9. 7-Position Custom-Cut Baffle Adjustment
Mounting Hardware Location
Hole 1 Hole 2 Hole 3
3-3/4" 4-1/4" 4-3/4"
Hole 2 Hole 3
3-1/2" 4"
29
1 2
3 4
A
B
Hole 4
5-1/4"
Hole 4
4-1/2"
R