Saturn 2008 Outlook Owner's Manual page 414

4. Hook one end of the cable onto the outside portion
of the liftgate hinge opposite (B).
5. Pull the cable (A) through the center of the
wheel (D), then the door striker (E), and the spare
tire heat shield (C).
5-98
7. Pull on the cable to make sure it is secure.
8. The metal tube should be centered at the striker.
10. Close the liftgate and latch it properly.
6. Hook the other end of
the cable onto the
outer portion of
the liftgate hinge (B).
9. Push the tube toward
the front of the vehicle.